The Dumble era continues. After the 2025 arrival of Trey’s Dumble ODS and the subsequent road-testing of Dumble-family backup options, the Summer 2026 rig appears to be a more settled version of that setup, focusing on Dumble s/n 100.
The main amp rack now contains the original black and silver Dumble s/n 100 along with a Bludotone clone of that amp. In addition, there is a small Dumble-style combo on the floor facing Trey, which is also a clone of s/n 100. That combo is not mic’d and does not appear to be part of the front-of-house guitar sound. Instead, it is likely there to excite the guitar and provide controlled feedback onstage.
Electric Guitar Cabinets:
• 1 x Paul Languedoc 2×12 cabinet.
Cabinets are mic’d with a Royer R-122V vacuum tube ribbon mic and a Shure Beta 57a.
Electric Guitars:
• Koa 1.
Electric Rig Effects:
Gain/Overdrive
• 2 x Tube Screamer (Analogman modded)
• Ross Compressor
• Divided Drive
• Klon
Voicing
• Digitech Whammy II.
• Vox McCoy Wah.
• Line 6 M5 Stompbox modeler PRE.
Time-Based (reverb and delay)
• Line 6 M5 Stompbox modeler POST.
• Boomerang Phrase Sampler.
Modulation
• Nux Voodoo Vibe
Effects Loop Rack
• Keeley Zoma
• Keeley Rotary
• Way Huge Supa Puss
• Ibanez DM-2000
• Keeley RK2K
(the effects loops are buffered by Two Rock effects loop rack mount units)
M5 patches
• Auto V
• Particle
• Delay
• Sweep
• Jedi
• Growl
• Reverse
• Vibe
• BOA
• Synth
• Freq
—-

—-

—-

—-

—-

—-

thx for the breakdown, any particular reason why you didn’t do one for the sphere?
It’s really hard at the Sphere as a lot of the gear is off stage, but I could do some of the basics.
Thanks for the instant content Ryan! Great to have this at the top of a tour to be able to watch for changes (if they happen)…
Great write up as always. What’s the Divided Drive?
The Divided Drive is a new pedal based on Trey’s 90’s setup with modified drives that I designed for less mid-honk and more open.
https://stompunderfoot.com/divided-drive
are all drive sections still before ross comp? or is that the actual order?
Drives before comp.
What is the signal chain order?
Thanks Ryan!!! Good to see you doing this!!
What are the footswitches on the left of the RS10, right of the Boomerang, and above the Whammy II?
It’s a footswitch for channel switching / boost on the BludoDrive Amp.
At Deer Creek this weekend Trey seemed to be fiddling with his rack behind him more during the show than I seem to recall. Are there new effects in there that are new or is this just early dates getting dialed in still?
Thanks so much I use a line 6 pod go for my Trey setup!! And please sombody answer this!!! For treys line 6 effects what is BOA as listed
it’s the 80A flanger algo.
Seems like the Bludo combo is missing at MSG (maybe since even before). Any idea why he abandoned it?
Hey Ryan- thanks so much for all your work on this. This is incredible.
I’m just curious if he uses a separate buffer anywhere in his chain. there’s obviously the buffer effect loop and the digital pedals are buffered- but I didn’t know if there was any other standalone units placed throughout the chain.
Thanks so much!!
Hey Ryan. Amazing site.
I was just wondering if he uses any buffers early in his chain. I’m sure there’s a buffered effect loop after the preamp, but I was wondering if there was a buffer somewhere embedded into the circuit earlier on maybe even before it hits switcher? thanks again for everything you do.
Matt